Step 1: Preparing the plate
Remove any nail cuticles. Then, buff the surface with a 180/240-grit file or a 180, 200, or 260-grit mandrel to increase product adhesion.
Step 2: Cleansing
Dust your nails with a dust brush. Clean the nail plate with Cleaner No. 1 to remove moisture and any dirt.
Step 3: Slip layer
Apply a thin layer of gel to the nail plate. Do not cure at this stage.
Step 4: Construction and Light Line
Take a small drop of gel (depending on the nail length) and apply it to the apex of the nail, 1/3 of the way down. Work your way down to the cuticles and spread the gel along the entire length of the nail using your favorite technique. Create a light line with a thin Master NailArt 006 or Master NailArt 007 brush, then cure for 60 seconds. Make sure to use minimal product around the nail folds. Remember, you can also shape the light line by gently twisting the client's hand downward.
Step 5:
Apply the hybrid top coat, form a light line with a thin brush Master NailArt 006 or Master NailArt 007
Bis-HEMA Polyneopentyl Glycol Adipate/IPDI Copolymer, Polyether Urethane Methacrylate, Hydroxypropyl Methacrylate, 2-(Methacryloyloxy)ethylsuccinate, Silica Dimethicone Silylate, Ethylhexyl Acrylate, PEG-3 Trimethylolpropane Triacrylate, Ethyl Trimethylbenzoyl Phenylphosphinate, Cellulose Acetate Butyrate, Polyester Resin, BHT +/- CI [19140, 74160, 77891, 73360, 77491, 69800, 74260, 77489, 16035, 77007]
For professional use only. Read directions for use carefully before first use. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Avoid inhalation of dust during filing. Keep out of reach of children. Product may cause skin and eye irritation. May cause an allergic reaction.