● Creates no streaks on the nail surface.
● Minimizes the risk of flooding the cuticles.
● Will create perfect duets in combination with other colours.
● Enables to create a permanent manicure.
● Can be used for a variety of decorations.
● Safe formula – just like all our gel polishes.
Application tips:
- ● Remember to disinfect your hands first (yours and your clients’). Put on gloves, then assess the condition of your hands and nails and check if there are any contraindications to the treatment.
● Push the cuticles (using a cuticle pusher or a wooden stick) and work on them with e-file bits (for example, Cuticle 9).
● Matte the nail plate using a 100/180 buffer and remove the excess dust with a soft brush.
● Soak a lint-free cotton swab in the purple Cleaner and thoroughly dehydrate the nail plate.
● Apply primer – in 90% cases, it will be Acid Free Primer.
● Apply a thin layer of the selected gel polish base and cure it for 30 seconds in the MultiLed lamp.
● If the surface of the base requires filing (for example in the case of Protein Base), remove the sticky layer from the nails with a lint-free cotton swab soaked in Wipe Off Cleaner.
● Use a 100/180 file or a buffer of the same gradation to smoothen the surface of the base.
● Remove the excess dust with a soft brush and clean the surface again with the purple Cleaner or Wipe Off Cleaner.
● Apply gel polish. Two coats of colour are required to obtain full coverage.
● Cure each of them for 30 seconds in a MultiLed lamp.
● To perfectly finish the whole design, reach for a properly selected top coat (for example, Tip Top or Wet Look).
● Cure top coat for 30 seconds in a MultiLed lamp.
● Wait about 1 minute after removing the hand from the lamp.
● If you used a top coat with a sticky layer, wipe each nail with a lint-free cotton swab soaked in Shea Super Shine Effect Cleaner.
● Want to make your look even shinier? Polish the nails with a dry lint-free cotton pad!
