Preparing the tin
-
Select the tile or pattern you want to clean and spray its surface evenly
-
Using a dust-free cotton swab, spread the product over the tin and let it evaporate
-
Thus prepared tin is ready to apply a portion of the stamp varnish
The product can be used to clean the tin in between the successive bounce patterns
Cleaning after finishing work
-
If the varnish dries on the plate - reach for Cleaner 1 and a dust-free swab.
-
Spray the tin where the dried varnish is and collect the excess with the swab. Repeat the process to thoroughly clean the design.
-
If there is a thicker layer of varnish on the tin - you can use a poultice - spray the tin with cleaner and put a dust-free swab on it - after a while remove the dried varnish from the surface of the tin.