- laser-cut plate with twelve geometric patterns
APPLICATION GUIDELINES:
Stamping with polish:
In order to make a design from the selected stamping plate pattern, the nail surface must first be properly prepared:
- cover the hybrid styling with a matt top coat or matt the surface with a 280-grit buffer and clean thoroughly with a cotton swab soaked in Cleaner 1.
- gel styling - after filing, it is best to cover with a matt top or matt the surface with a 280-grit buffer and clean thoroughly with a cotton swab soaked in Cleaner 1.
- classic protein polish - wait carefully until the color layer is completely dry.
The design chosen on the plate should then be coated with a thick layer of stamp polish and the excess scraped off the plate with a quick and decisive movement. Immediately afterwards, imprint the design from the plate with a stamp and transfer it to the nail surface. Once the design has dried for a while, we can protect it with the top coat of our choice, cure it in a lamp, or cover it with a top coat.
PRO TIP:
Clean the plate gently with a cotton swab soaked in Nail Polish Remover. If you are using gels for stamping then Wipe Off will work great.
If the gels harden on the surface of the plate, we can put a swab soaked in Nail Polish Remover on top of it, and then clean it again with Wipe Off Cleaner. Alternatively, we can soak the plate in warm water and use a stick to gently remove the hardened gel from the nooks. Take care while scratching the surface too hard with a stick or other tools may cause scratches, adversely affecting the design quality.
