Nail forms by Joanna Bandurska - 100 pcs

ADVANTAGES, PROPERTIES:

• Rigid form, facilitating and stabilizing work with the mass,
• It also allows you to obtain long extensions,
• It has a leg that stabilizes the form,
• Strong glue, allowing you to achieve a perfect tunnel and bend;
• The glue does not deteriorate even after repeated touching of the form, 
• additional, auxiliary lines that facilitate work and form adjustment:

1. White, long lines: used to model the shape, build a square; 
2. White, semicircular lines: helps in building an oval shape;
3. Lines next to the numbers on the form: make it easier to build a perfect almond;
4. Black lines: indicate how the form is placed relative to the finger axis - especially helpful when nails grow up/down; 
5. Yellow Lines: used to give the form a flatter shape - useful for difficult, troublesome nail shapes; 
6. Green Lines: used to deepen the form, for nails with deeper growth points or, e.g., overgrown hyponychium; 
7. Red Lines: help in releasing the lateral periungual folds, cutting out the so-called "devils"; the length of the lines has been taken into account to the actual need to cut them to properly free the embankments;
8. Purple Lines: an ideal aid for building shapes such as edge or Russian almond, the side lines of this line are cut at an angle of 45 degrees, which helps to immediately give the right shape

• The forms are an ideal working tool for both beginner and experienced stylists; 
• Indigo by Joanna Bandurska nail forms improve the pace of work. 

APPLICATION TIPS / HOW TO USE:

1. Prepare a natural styling plate - matt it and prepare the cuticles.
2. Place the form so that it fits perfectly under the nail. Trim it at the edges if necessary, based on the line color guidelines: 

Black lines: indicate how the form is placed relative to the finger axis 

Yellow Lines: used to give the form a flatter shape 

Green Lines: used to deepen the form, for nails with deeper growth points or, e.g., overgrown hyponychium; 

Red Lines: help in releasing the lateral periungual folds, cutting out the so-called "devils"; the length of the lines has been taken into account to the actual need to cut them to properly free the embankments;

1. Apply the selected product to the mold to build the skeleton of the selected shape.
2. Make the extension using the selected material and appropriate method.
3. If necessary, file the shape with a 100/180 file.
4. Smooth the surface of the constructed shape with a polisher with a grit of 100/180 or 180/220.
5. Dust off the surface and wash it with Cleaner Wipe Off.
6. Apply your chosen top coat and cure it in the lamp.
7. If the selected top coat leaves a sticky layer, remove it with Cleaner Shea Super Shine Effect.

PRO TIP: to make it easier to work with forms, the red lines - the "devils" - can be cut out completely after adapting to your needs. When working on the shape of edge and Russian almond - to make work easier, you can cut the forms along the purple line.